Nanrobot | Electric Scooter Center Display

Central Display Connector Kit for Nanrobot Scooters

Overview

Only suitable for Nanrobot central control scooters. D4+2.0/3.0/N6-M5/Lightning central display: The connector with the white arrow is connected to the wiring harness and the other connector is connected to the throttle.

Benefits

• Simple plug?in installation with the existing wiring harness.
• Direct compatibility with Nanrobot central control systems.
• Clear, straightforward wiring to avoid guesswork.

Features

• Supports D4+2.0/3.0/N6-M5/Lightning central displays.
• The connector with the white arrow goes to the wiring harness; the other connector goes to the throttle.
• From November 2024, the N6 72V/LS7+72V displays will switch to 4 wires and the throttle to 1 wire.
• If you use a new display with an old throttle, connect one wire of the throttle to the display, leave the other wire empty, and connect the 3 instrument wires to the wiring harness.

Specifications

• Compatibility: Nanrobot central control scooters only.
• Wiring arrangement: two connectors; white-arrow connector to the wiring harness, other connector to the throttle.
• Wire-count update: starting November 2024, display wires become 4 and throttle becomes 1.
• Usage note: if mixing new display with old throttle, follow the wiring approach described in the features.